NCE25TD120LT_NCE40P70K Introduction

Xinjie, behind this FET NCE80H12, utilizes its own technical advantages to work closely with 8-inch wafer foundries, packaging and testing foundries, and has a complete quality management system to ensure continuous product quality and stable supply.

In response to this demand, Xinjie can produce N-channel trench process MOS transistors with small internal resistance and good overcurrent resistance - NCE80H12, the on-resistance of NCE80H12 is less than 6mΩ, the output current can reach 120A, and the motor torque is better , .

NCE25TD120LT_NCE40P70K

NCE30P06J

The reason is that the on-resistance is small and it is easy to manufacture. Therefore, in the application of switching power supply and motor drive, NMOS is generally used.

As for why not to use depletion-type MOS tubes, it is not recommended to get to the bottom of it. For these two enhanced MOS tubes, NMOS is more commonly used. .

NCE30H11BG NCE3095G NCE30ND09S NCE3013J NCE30ND35Q.

NCE2025I NCE2025S NCE2030K NCE2030U NCE2030.

NCE25TD120LT_NCE40P70K

NCEP02525G

NCE3416 NCE2010E NCE2006NE NCE8804 NCE8651Q.

KIA Semiconductor has always implemented a total quality management system, which is to track and monitor the quality of all products from the chip design to the customer's use.

MOSFET is a type of FET (the other is JFET), which can be made into enhancement mode or depletion mode, P-channel or N-channel, a total of 4 types, but only the enhancement-mode N-channel MOS is actually used. Tube model and enhanced P-channel MOS tube model, so NMOS is usually mentioned, or PMOS refers to these two.

NCE6080K product features VDS=60V, ID =80A RDS(ON)<8.5mΩ@VGS=10V Ultra-low RDSON high-density battery design with good stability, good uniformity, high EAS and good heat dissipation packaging.

NCE25TD120LT_NCE40P70K

The battery cell is equivalent to the heart of the lithium battery, and the lithium battery protection board is mainly composed of a protection chip (or management chip), a MOS tube, a resistor, a capacitor, and a PCB board.

The performance parameters of NCE3401 are still good, suitable for load switching or pulse width modulation applications, and the impedance value is relatively low, and the new clean energy MOS tube has the characteristic process technology of shielded gate power and super junction power MOSFET. The parameter performance and sample delivery performance can be almost the same as foreign MOS tubes, such as the same used in lithium battery protection boards, NCE3401, AO3401, IRLML5203TR, DMP3098L-7, I think the functions can be satisfied in comparison, and the price is moderate NCE3401 is more suitable.

relevant information