NCE18ND11U_NCE55P15 Introduction

MOS tubes like NCE80H12 convert the DC power in the battery into AC power when the electric vehicle is running normally, thereby driving the motor to run.

The above is the specification of the power mos tube NCE80H12. The power mos tube NCE80H12 used in our electric vehicle controller is actually different from the low-power mos structure in the usual cmos integrated circuit.

NCE18ND11U_NCE55P15

NCE30H10K

NCE50TD120WT NCE40TD120T NCE40TD120BT NCE40TD120WT NCE40TD120LT.

NCE3404Y NCE3400A NCE3400 NCE30ND07AS NCE3008N.

MOS tube 3306 product features 1. RDS(on)=7mΩ@VGS=10V 2. Lead-free green equipment 3. Low resistance switch to reduce conduction loss 4. High avalanche current.

NCE80TD65BT NCE80TD65BP NCE60TD120UT NCE75TD120BT NCE75TD120VT.

NCE18ND11U_NCE55P15

NCEP6090K

NCE3008M NCE3010S NCE3011E NCE30D0808J NCE3018AS.

NCE3416 NCE2010E NCE2006NE NCE8804 NCE8651Q.

MOSFET is a type of FET (the other is JFET), which can be made into enhancement mode or depletion mode, P-channel or N-channel, a total of 4 types, but only the enhancement-mode N-channel MOS is actually used. Tube model and enhanced P-channel MOS tube model, so NMOS is usually mentioned, or PMOS refers to these two.

Main parameters of MOS tube 3306 products Drain-source voltage: 60V Gate-source voltage: ±25V Continuous leakage current: 80A/60A Pulse leakage current: 300A Avalanche current: 21.5A Avalanche energy: 462.25MJ.

NCE18ND11U_NCE55P15

NCE30TD120UT NCE40TD120UT NCE40TD120VT NCE30TD120BP NCE25TD120BT.

The functions of the MOS tube in the protection board are: 1. Detect overcharge, 2. Detect over-discharge, 3. Detect over-current during charging, 4. Detect over-current during discharge, 5. Detect over-current during short circuit.

relevant information