NCE3420_NCE60P06S Introduction

Their various switching actions are almost the same. Of course, when they burn out, there must be a small tube that can't bear it first. So the stability of the tube is inseparable from the manufacturing process, and poor workmanship may result in the inconsistency of the parameters of these small tubes.

The above is the specification of the power mos tube NCE80H12. The power mos tube NCE80H12 used in our electric vehicle controller is actually different from the low-power mos structure in the usual cmos integrated circuit.

NCE3420_NCE60P06S

NCE0102E

NCE30H11BK NCE8736 NCE3040Q NCE3008Y NCE3009S.

As for why not to use depletion-type MOS tubes, it is not recommended to get to the bottom of it. For these two enhanced MOS tubes, NMOS is more commonly used. .

The reason is that the on-resistance is small and it is easy to manufacture. Therefore, in the application of switching power supply and motor drive, NMOS is generally used.

NCE6080K matches KIA product 3306, and KIA MOS tube 3306 has two specifications, A and B. The following will introduce the specific parameters, packaging and specifications of the 3306 and NCE6080K MOS tubes.

NCE3420_NCE60P06S

NCEP016N85LL

NCE3416 NCE2010E NCE2006NE NCE8804 NCE8651Q.

KIA Semiconductor has always implemented a total quality management system, which is to track and monitor the quality of all products from the chip design to the customer's use.

NCE4612SP NCE30H32VD NCE3402 NCE3402A NCE30H21.

NCE2012 NCE20H10G NCE20H11 NCE3406N NCE2014ES.

NCE3420_NCE60P06S

NCE30TD120UT NCE40TD120UT NCE40TD120VT NCE30TD120BP NCE25TD120BT.

The functions of the MOS tube in the protection board are: 1. Detect overcharge, 2. Detect over-discharge, 3. Detect over-current during charging, 4. Detect over-current during discharge, 5. Detect over-current during short circuit.

relevant information