NCEB301Q_NCE01P30K Introduction

The size of this internal resistance basically determines how much on-current the MOS tube chip can withstand (of course, it is related to other factors, such as thermal resistance). The smaller the internal resistance, the larger the current (because the heat is small). The resistance of this current path is called the internal resistance of the MOS tube, that is, the on-resistance.

In addition to the above-mentioned NCE80H12 suitable for electric vehicle controllers, Nanshan Electronics also provides Fenghua resistance-capacitance sense, long-crystal MOS transistors, Epson active and passive crystal oscillators, etc.

NCEB301Q_NCE01P30K

NCE82H140

NCE6080K matches KIA product 3306, and KIA MOS tube 3306 has two specifications, A and B. The following will introduce the specific parameters, packaging and specifications of the 3306 and NCE6080K MOS tubes.

MOS tube 3306 product features 1. RDS(on)=7mΩ@VGS=10V 2. Lead-free green equipment 3. Low resistance switch to reduce conduction loss 4. High avalanche current.

NCE30H11BG NCE3095G NCE30ND09S NCE3013J NCE30ND35Q.

NCEB301G NCE3065G NCE30H14K NCE3095K NCE3065Q.

NCEB301Q_NCE01P30K

NCEP0140AK

NCE6080K product features VDS=60V, ID =80A RDS(ON)<8.5mΩ@VGS=10V Ultra-low RDSON high-density battery design with good stability, good uniformity, high EAS and good heat dissipation packaging.

NCE6802 NCE30H29D NCEB301Q NCEB301Q NCEB301G.

Main parameters of MOS tube 3306 products Drain-source voltage: 60V Gate-source voltage: ±25V Continuous leakage current: 80A/60A Pulse leakage current: 300A Avalanche current: 21.5A Avalanche energy: 462.25MJ.

NCE3075Q NCE3015S NCE3400E NCE3065K NCE3095AK.

NCEB301Q_NCE01P30K

The lithium battery of electric vehicles can work normally, largely thanks to the lithium battery protection board.

The lithium battery is mainly composed of two blocks, the battery cell and the lithium battery protection board PCM.

relevant information