NCE3080KA_NCEP40T11G Introduction

Their various switching actions are almost the same. Of course, when they burn out, there must be a small tube that can't bear it first. So the stability of the tube is inseparable from the manufacturing process, and poor workmanship may result in the inconsistency of the parameters of these small tubes.

MOS tubes like NCE80H12 convert the DC power in the battery into AC power when the electric vehicle is running normally, thereby driving the motor to run.

NCE3080KA_NCEP40T11G

NCE2301C

NCE75T60T NCE80TD60BT NCE80TD60BP NCE60TD65BP NCE60TD65BT.

NCEB301G NCE3065G NCE30H14K NCE3095K NCE3065Q.

NCE75TD120WT NCE50TD120BP NCE50TH120BP NCE50TD120BT NCE50TD120VT.

As for why not to use depletion-type MOS tubes, it is not recommended to get to the bottom of it. For these two enhanced MOS tubes, NMOS is more commonly used. .

NCE3080KA_NCEP40T11G

NCEP050N85D

General Characteristics ● V DS = 30V, ID = 95A R DS(ON) <5.1mΩ@V GS = 10V R DS(ON) <8.5mΩ@V GS = 5V ● High density battery design, ultra-low Rdson ● Fully characterised avalanche Voltage and current ● Good stability and high uniformity? AS ● Excellent package, good heat dissipation.

NCE2012 NCE20H10G NCE20H11 NCE3406N NCE2014ES.

NCE3075Q NCE3015S NCE3400E NCE3065K NCE3095AK.

NCE3416 NCE2010E NCE2006NE NCE8804 NCE8651Q.

NCE3080KA_NCEP40T11G

In the lithium battery protection board, the most important thing is to protect the chip and MOS tube.

The main functions of the lithium battery protection board are: 1 overcharge protection, 2 short circuit protection, 3 over current protection, 4 over discharge protection, 5 normal state.

relevant information