NCEP3085EG

  • 2022-09-24 12:35:29

NCEP3085EG

NCE3015S_NCEP3085EG Introduction

In response to this demand, Xinjie can produce N-channel trench process MOS transistors with small internal resistance and good overcurrent resistance - NCE80H12, the on-resistance of NCE80H12 is less than 6mΩ, the output current can reach 120A, and the motor torque is better , .

So the stability of the tube is inseparable from the manufacturing process, and poor workmanship may result in the inconsistency of the parameters of these small tubes. Their various switching actions are almost the same. Of course, when they burn out, there must be a small tube that can't bear it first.

NCE3015S_NCEP3085EG

NCE3420

NCE3019AS NCE3045G NCE3400AY NCE30ND07S NCE8601B.

NCE3404Y NCE3400A NCE3400 NCE30ND07AS NCE3008N.

Therefore, in the application of switching power supply and motor drive, NMOS is generally used. The reason is that the on-resistance is small and it is easy to manufacture.

MOS tube 3306 product features 1. RDS(on)=7mΩ@VGS=10V 2. Lead-free green equipment 3. Low resistance switch to reduce conduction loss 4. High avalanche current.

NCE3015S_NCEP3085EG

NCE60P20K

General Characteristics ● V DS = 30V, ID = 95A R DS(ON) <5.1mΩ@V GS = 10V R DS(ON) <8.5mΩ@V GS = 5V ● High density battery design, ultra-low Rdson ● Fully characterised avalanche Voltage and current ● Good stability and high uniformity? AS ● Excellent package, good heat dissipation.

The TNPU e3 series devices have a TCR as low as 2 ppm/K, and are available in 0603, 0805, and 1206 frame sizes and from 500 to 20 kΩ.

NCE2012 NCE20H10G NCE20H11 NCE3406N NCE2014ES.

. For example, electronic fuel injection system, anti-lock brake control, anti-skid control, traction control, electronically controlled suspension, electronically controlled automatic transmission, electronic power steering, etc. The electronic device that can be used independently in the environment has no direct relationship with the performance of the car itself.

NCE3015S_NCEP3085EG

The functions of the MOS tube in the protection board are: 1. Detect overcharge, 2. Detect over-discharge, 3. Detect over-current during charging, 4. Detect over-current during discharge, 5. Detect over-current during short circuit.

NCE2302D NCE2302F NCE1012E NCE2302B NCE2302.

relevant information