NCE30H10G_NCEP4090AGU Introduction

The above is the specification of the power mos tube NCE80H12. The power mos tube NCE80H12 used in our electric vehicle controller is actually different from the low-power mos structure in the usual cmos integrated circuit.

So the stability of the tube is inseparable from the manufacturing process, and poor workmanship may result in the inconsistency of the parameters of these small tubes. Their various switching actions are almost the same. Of course, when they burn out, there must be a small tube that can't bear it first.

NCE30H10G_NCEP4090AGU

2N7002DW

NCE3404Y NCE3400A NCE3400 NCE30ND07AS NCE3008N.

Vishay Draloric TNPU e3 series resistors have the proven reliability of TNPW e3 products with improved accuracy, low TCR, tolerances not greater than 0.02 %, and excellent long-term stability—for example, 1,000 hours at rated power P70 The maximum resistance change rate ≤ 0.05 %. This unique technical feature makes this AECQ200-qualified resistor ideal for applications such as op amps and sensor detection circuits in test and measurement, automotive, industrial, medical, and communications equipment.

. As for why not to use depletion-type MOS tubes, it is not recommended to get to the bottom of it. For these two enhanced MOS tubes, NMOS is more commonly used.

NCE3019AS NCE3045G NCE3400AY NCE30ND07S NCE8601B.

NCE30H10G_NCEP4090AGU

NCEP15T11A

NCE3008M NCE3010S NCE3011E NCE30D0808J NCE3018AS.

NCE2012 NCE20H10G NCE20H11 NCE3406N NCE2014ES.

Applications ● Power switching applications ● Hard switching and high frequency circuits ● Uninterruptible power supplies.

MOSFET is a type of FET (the other is JFET), which can be made into enhancement mode or depletion mode, P-channel or N-channel, a total of 4 types, but only the enhancement-mode N-channel MOS is actually used. Tube model and enhanced P-channel MOS tube model, so NMOS is usually mentioned, or PMOS refers to these two.

NCE30H10G_NCEP4090AGU

MOS tube NCE3401 is a -30V drain-source voltage, 4.2A current, P-channel MOS tube in SOT-23 package. .

The functions of the MOS tube in the protection board are: 1. Detect overcharge, 2. Detect over-discharge, 3. Detect over-current during charging, 4. Detect over-current during discharge, 5. Detect over-current during short circuit.

relevant information