NCE8601B_NCEPB303GU Introduction

The above is the specification of the power mos tube NCE80H12. The power mos tube NCE80H12 used in our electric vehicle controller is actually different from the low-power mos structure in the usual cmos integrated circuit.

In simple terms, the motor is driven by the output current of the MOS tube such as NCE80H12. The larger the output current (in order to prevent overcurrent from burning the MOS tube, the controller has limited current protection), the motor torque is strong and the acceleration is powerful, so MOS Tubes play a very important role in electric vehicle controllers.

NCE8601B_NCEPB303GU

NCE1520

NCE30H11K NCE3402B NCE30H10AK NCE2304 NCE3404.

NCE50TD120WT NCE40TD120T NCE40TD120BT NCE40TD120WT NCE40TD120LT.

NCE2025I NCE2025S NCE2030K NCE2030U NCE2030.

NCE3019AS NCE3045G NCE3400AY NCE30ND07S NCE8601B.

NCE8601B_NCEPB303GU

NCEP0114AS

For fine-tuning of Vantam's analog signal paths, including low-pass filters [LPF], negative feedback circuits [NFB], preamp ICs, IV converters, and headphone amplifier circuits, VentureCraft previously relied on thick carbon-containing diaphragms type resistor. . Last year, VentureCraft began specifying Vishay products after learning that Vishay's thin-film MELF resistors (shown in Figure 1) could provide excellent sound quality. Over the past few years, the company has turned to thin-film technology as it focuses on providing audio performance differentiation.

These tests and evaluations used network analyzers and the human ear, and they all confirmed improvements in sound quality. . VentureCraft conducted exhaustive testing and individual sound evaluations of the MMU 0102, MMA 0204 and MMB 0207 thin film MELFs before incorporating Vishay components into the newly released SounDroid Vantam.

General Characteristics ● V DS = 30V, ID = 95A R DS(ON) <5.1mΩ@V GS = 10V R DS(ON) <8.5mΩ@V GS = 5V ● High density battery design, ultra-low Rdson ● Fully characterised avalanche Voltage and current ● Good stability and high uniformity? AS ● Excellent package, good heat dissipation.

NCE4612SP NCE30H32VD NCE3402 NCE3402A NCE30H21.

NCE8601B_NCEPB303GU

The lithium battery of electric vehicles can work normally, largely thanks to the lithium battery protection board.

The main functions of the lithium battery protection board are: 1 overcharge protection, 2 short circuit protection, 3 over current protection, 4 over discharge protection, 5 normal state.

relevant information