NCE40H29D_NCEP60T12 Introduction

The above is the specification of the power mos tube NCE80H12. The power mos tube NCE80H12 used in our electric vehicle controller is actually different from the low-power mos structure in the usual cmos integrated circuit.

In addition to the above-mentioned NCE80H12 suitable for electric vehicle controllers, Nanshan Electronics also provides Fenghua resistance-capacitance sense, long-crystal MOS transistors, Epson active and passive crystal oscillators, etc.

NCE40H29D_NCEP60T12

NCE4030K

NCE3404Y NCE3400A NCE3400 NCE30ND07AS NCE3008N.

MOS tube 3306 product features 1. RDS(on)=7mΩ@VGS=10V 2. Lead-free green equipment 3. Low resistance switch to reduce conduction loss 4. High avalanche current.

NCE3019AS NCE3045G NCE3400AY NCE30ND07S NCE8601B.

What do the three capacitance parameters represent in the body of the tube? How did it form? . There are three parasitic capacitance parameters in the MOS tube specification, namely: input capacitance Ciss, output capacitance Coss, and reverse transfer capacitance Crss.

NCE40H29D_NCEP60T12

NCEP035N12VD

. For example, electronic fuel injection system, anti-lock brake control, anti-skid control, traction control, electronically controlled suspension, electronically controlled automatic transmission, electronic power steering, etc. The electronic device that can be used independently in the environment has no direct relationship with the performance of the car itself.

NCE2060K NCE2090K NCE20H11K NCE20H18 NCE20H20.

MOSFET is a type of FET (the other is JFET), which can be made into enhancement mode or depletion mode, P-channel or N-channel, a total of 4 types, but only the enhancement-mode N-channel MOS is actually used. Tube model and enhanced P-channel MOS tube model, so NMOS is usually mentioned, or PMOS refers to these two.

NCE3020K NCE3025Q NCE3035K NCE3025G NCE3030K.

NCE40H29D_NCEP60T12

In the lithium battery protection board, the most important thing is to protect the chip and MOS tube.

The functions of the MOS tube in the protection board are: 1. Detect overcharge, 2. Detect over-discharge, 3. Detect over-current during charging, 4. Detect over-current during discharge, 5. Detect over-current during short circuit.

relevant information