NCE5520Q_NCEP6090AK Introduction

The smaller the internal resistance, the larger the current (because the heat is small). The resistance of this current path is called the internal resistance of the MOS tube, that is, the on-resistance. The size of this internal resistance basically determines how much on-current the MOS tube chip can withstand (of course, it is related to other factors, such as thermal resistance).

According to whether the inversion layer exists in the case of no electricity, MOS tubes can be divided into enhancement type and depletion type. The core of power semiconductors is the PN junction. From diodes, triodes to field effect transistors, various applications are made according to the characteristics of the PN junction. Field effect transistors are divided into junction type and insulated gate type, among which the insulated gate type is also called MOS tube (Metal Oxide Semiconductor).

NCE5520Q_NCEP6090AK

NCE2333Y

The reason is that the on-resistance is small and it is easy to manufacture. Therefore, in the application of switching power supply and motor drive, NMOS is generally used.

Barrier capacitance: In power semiconductors, when the N-type and P-type semiconductors are combined, the electrons of the N-type semiconductor will partially diffuse into the holes of the P-type semiconductor due to the concentration difference, so they will form on both sides of the junction surface. Space charge area (the electric field formed by the space charge area will resist the diffusion movement, and finally make the diffusion movement reach equilibrium);

Figure four types of MOSFETs and their graphical symbols. According to the two points of the conductive channel and the process of channel formation, MOS tubes can be divided into: P-channel enhancement MOS tubes, P-channel depletion MOS tubes, N-channel enhancement MOS tubes and N-channel depletion MOS tubes . Power MOSFETs are generally rarely used in P-channel. Since the mobility of holes is lower than that of electrons, the on-resistance of P-channel transistors is larger than that of N-channel transistors for the same channel size. .

The conductive channel of the MOS tube can be formed during the production process or by turning on an external power supply. When the gate voltage is equal to zero, there is a channel (that is, formed during production), which is called depletion mode. When an external voltage is applied The one that forms the channel later is called the enhancement type. .

NCE5520Q_NCEP6090AK

NCEP15T14LL

Power MOSFETs are used in power conversions such as switching power supplies and inverters, and they work in two regions, the cut-off region and the breakdown region. The breakdown region is in the region of considerable drain-source voltage UDS, and the drain current is approximately constant. . When the UDS increases to a certain value, the drain PN junction breaks down, the leakage current increases rapidly, and the curve turns upward and enters the breakdown region. The full area (UDS>UGS-UT) guarded in the above three areas is the full area, also known as the constant current area or the amplification area.

. The parasitic capacitance structure of the MOS tube is as follows. Among them, the width of polysilicon, the width of the channel and the trench, the thickness of the G oxide layer, and the doping profile of the PN junction are all factors that affect the parasitic capacitance.

The characteristics of a MOSFET can be characterized by a transfer characteristic curve and a drain output characteristic curve. . Figure 3 shows the handling characteristics of a certain FET. The transfer characteristic refers to the relationship curve between the gate voltage UGS and the corresponding drain current ID when the voltage UDS between the drain and the source is at a certain fixed value.

NCE2060K NCE2090K NCE20H11K NCE20H18 NCE20H20.

NCE5520Q_NCEP6090AK

The performance parameters of NCE3401 are still good, suitable for load switching or pulse width modulation applications, and the impedance value is relatively low, and the new clean energy MOS tube has the characteristic process technology of shielded gate power and super junction power MOSFET. The parameter performance and sample delivery performance can be almost the same as foreign MOS tubes, such as the same used in lithium battery protection boards, NCE3401, AO3401, IRLML5203TR, DMP3098L-7, I think the functions can be satisfied in comparison, and the price is moderate NCE3401 is more suitable.

NCE20ND06 NCE2008N NCE2312 NCE2312A NCE8205A.

relevant information