NCE0106AZ_NCEP092N10AS Introduction

There are many well-known brands in the electronics industry, each brand is like a person's name, and its origin and naming have its own unique style. When naming the company, the founders incorporated their nostalgia for the past and expectations for the future. A simple name with many untold stories behind it... . Their success today is due to the founders.

A MOS tube is a semiconductor device in which unipolar carriers participate in conduction. According to the carrier of the conduction channel, it can be divided into N channel and P channel. Assuming that the carriers of the conductive channel are electrons, it is called an N-channel; assuming that the carriers are holes, it is called a P-channel.

NCE0106AZ_NCEP092N10AS

NCE50TD120WT

The following describes the principle of the MOS transistor with the structure of an N-channel enhancement type low-power MOSFET. . However, in terms of structure, there is a big difference between them. In order to better understand the mechanism of power MOSFET, we must first recall the mechanism of low-power FET. Working principle of power MOS tube Power MOS tube is developed from low-power MOS tube.

Figure four types of MOSFETs and their graphical symbols. According to the two points of the conductive channel and the process of channel formation, MOS tubes can be divided into: P-channel enhancement MOS tubes, P-channel depletion MOS tubes, N-channel enhancement MOS tubes and N-channel depletion MOS tubes . Power MOSFETs are generally rarely used in P-channel. Since the mobility of holes is lower than that of electrons, the on-resistance of P-channel transistors is larger than that of N-channel transistors for the same channel size. .

There is parasitic capacitance between the three pins of the MOS tube, which is not what we need, but is caused by the limitation of the manufacturing process.

The conductive channel of the MOS tube can be formed during the production process or by turning on an external power supply. When the gate voltage is equal to zero, there is a channel (that is, formed during production), which is called depletion mode. When an external voltage is applied The one that forms the channel later is called the enhancement type. .

NCE0106AZ_NCEP092N10AS

NCE30P15S

NCE2060K NCE2090K NCE20H11K NCE20H18 NCE20H20.

. For example, electronic fuel injection system, anti-lock brake control, anti-skid control, traction control, electronically controlled suspension, electronically controlled automatic transmission, electronic power steering, etc. The electronic device that can be used independently in the environment has no direct relationship with the performance of the car itself.

NCE6802 NCE30H29D NCEB301Q NCEB301Q NCEB301G.

Variable resistance area (UDS In this area, when UDS increases, ID increases linearly. When the low UDS splitting and pinch-off voltage is large, the MOS tube is equivalent to a resistance, and this resistance decreases with the increase of UGS. Cut-off area (UGS). When the conductive channel is close to the pinch off, the growth slows down. Figure MOS tube drain output characteristics The output characteristics of field effect transistors can be divided into four regions: variable resistance region, cut-off region, breakdown region and constant current zone.

NCE0106AZ_NCEP092N10AS

NCE2302D NCE2302F NCE1012E NCE2302B NCE2302.

The main functions of the lithium battery protection board are: 1 overcharge protection, 2 short circuit protection, 3 over current protection, 4 over discharge protection, 5 normal state.

relevant information