NCE1579C_NCEP12N12 Introduction

The power mos used on electric vehicles is a three-dimensional structure. Low-power mos is a planar structure. The mos tube we have seen is actually composed of thousands of small mos tubes in parallel. You may think that one or a few bad moss should easily appear in thousands of small mos. In fact, it is not that easy. , the current manufacturing process basically guarantees the high consistency of various parameters of these small units.

A few days ago, Vishay Intertechnology, Inc. announced that it has expanded its TNPU e3 series of automotive-grade high-precision thin-film flat chip resistors with new devices with a temperature coefficient (TCR) as low as 2 ppm/K, in 0603, 0805 and 1206 form factors.

NCE1579C_NCEP12N12

NCE30P06J

Felix Zandman wrote in his memoir, "Many people think the name sounds odd, but for me, every time I hear it, I think of my grandmother and the power she gave me and others. , think of those Jewish communities in Eastern Europe that were forever erased. Why did Felix Zandman name his company Vishay? Because his grandmother was born in Vishay, the name of a small Lithuanian village in honor of family members killed in the Holocaust ." .

The reason is that the on-resistance is small and it is easy to manufacture. Therefore, in the application of switching power supply and motor drive, NMOS is generally used.

The following describes the principle of the MOS transistor with the structure of an N-channel enhancement type low-power MOSFET. . However, in terms of structure, there is a big difference between them. In order to better understand the mechanism of power MOSFET, we must first recall the mechanism of low-power FET. Working principle of power MOS tube Power MOS tube is developed from low-power MOS tube.

NCE30H11K NCE3402B NCE30H10AK NCE2304 NCE3404.

NCE1579C_NCEP12N12

NCEP01T12

Power MOSFETs are used in power conversions such as switching power supplies and inverters, and they work in two regions, the cut-off region and the breakdown region. The breakdown region is in the region of considerable drain-source voltage UDS, and the drain current is approximately constant. . When the UDS increases to a certain value, the drain PN junction breaks down, the leakage current increases rapidly, and the curve turns upward and enters the breakdown region. The full area (UDS>UGS-UT) guarded in the above three areas is the full area, also known as the constant current area or the amplification area.

NCE3075Q NCE3015S NCE3400E NCE3065K NCE3095AK.

NCE4612SP NCE30H32VD NCE3402 NCE3402A NCE30H21.

. The parasitic capacitance structure of the MOS tube is as follows. Among them, the width of polysilicon, the width of the channel and the trench, the thickness of the G oxide layer, and the doping profile of the PN junction are all factors that affect the parasitic capacitance.

NCE1579C_NCEP12N12

The battery cell is equivalent to the heart of the lithium battery, and the lithium battery protection board is mainly composed of a protection chip (or management chip), a MOS tube, a resistor, a capacitor, and a PCB board.

NCE25TD120WT NCE25TD120VT NCE15TD120LT NCE25TD120LT NCE40TD135LT.

relevant information