NTJD4401NT1G_TPC8212-H Introduction

The above is the specification of the power mos tube NCE80H12. The power mos tube NCE80H12 used in our electric vehicle controller is actually different from the low-power mos structure in the usual cmos integrated circuit.

The MOS tube is a voltage-driven device. As long as an appropriate voltage is applied between the gate G and the source S, the conduction path between the source S and D will be formed. As the switch tube of the driving part, the main focus of the MOS tube is the withstand voltage, current withstand value and switching speed.

NTJD4401NT1G_TPC8212-H

AM6968N-T1-PF

MOS tube 3306 product features 1. RDS(on)=7mΩ@VGS=10V 2. Lead-free green equipment 3. Low resistance switch to reduce conduction loss 4. High avalanche current.

NCE2025I NCE2025S NCE2030K NCE2030U NCE2030.

As for why not to use depletion-type MOS tubes, it is not recommended to get to the bottom of it. . For these two enhanced MOS tubes, NMOS is more commonly used.

Felix Zandman wrote in his memoir, "Many people think the name sounds odd, but for me, every time I hear it, I think of my grandmother and the power she gave me and others. , think of those Jewish communities in Eastern Europe that were forever erased. Why did Felix Zandman name his company Vishay? Because his grandmother was born in Vishay, the name of a small Lithuanian village in honor of family members killed in the Holocaust ." .

NTJD4401NT1G_TPC8212-H

SI4622DY-T1-E3

MOSFET is a type of FET (the other is JFET), which can be made into enhancement mode or depletion mode, P-channel or N-channel, a total of 4 types, but only the enhancement-mode N-channel MOS is actually used. Tube model and enhanced P-channel MOS tube model, so NMOS is usually mentioned, or PMOS refers to these two.

NCE3020K NCE3025Q NCE3035K NCE3025G NCE3030K.

The transfer characteristic refers to the relationship curve between the gate voltage UGS and the corresponding drain current ID when the voltage UDS between the drain and the source is at a certain fixed value. Figure 3 shows the handling characteristics of a certain FET. . The characteristics of a MOSFET can be characterized by a transfer characteristic curve and a drain output characteristic curve.

NCE2060K NCE2090K NCE20H11K NCE20H18 NCE20H20.

NTJD4401NT1G_TPC8212-H

The lithium battery is mainly composed of two blocks, the battery cell and the lithium battery protection board PCM.

The functions of the MOS tube in the protection board are: 1. Detect overcharge, 2. Detect over-discharge, 3. Detect over-current during charging, 4. Detect over-current during discharge, 5. Detect over-current during short circuit.

relevant information