AD1377JD/KD_AD1981HDJSTZ-91-RL Introduction

From a regional perspective, Japan closed a larger number of fabs. In addition, Renesas has adjusted its factory in Otsu, Shiga Prefecture, Japan, to manufacture optoelectronic devices. Taking Renesas as an example, the company's two recently closed fabs are both 150mm, including a factory in Kochi Prefecture, Japan, which mainly produces analog, logic devices and some old-fashioned micro components. It is reported that Renesas expects to close two more 150mm fabs in 2020 or 2021.

The low IQ of the TPS62840 enables 80% efficiency at 1-µA loads, 30% higher than comparable devices in the industry. . Longer battery life and very high light load efficiency: Lower IQ consumption provides longer IQ for very light loads (below 100µA) and systems operating primarily in standby/factory mode (no switching) battery life.

AD1377JD/KD_AD1981HDJSTZ-91-RL

AD1584BRTZ-R7

Texas Instruments has unveiled what the company calls "breakthrough" bulk acoustic wave (BAW) resonator technology. At just 100 microns in size, these tiny timers are smaller than the diameter of a human hair, but they operate at much higher frequencies than quartz crystals, enabling the integration of high-precision and ultra-low jitter clocks directly into packages that contain other circuitry, TI say. This enables TI to introduce the industry's first crystalless wireless MCU for the embedded market, the SimpleLink CC2652RB, with the clock contained in the same chip.

So, does this mean that 150mm wafers are gradually withdrawing from the stage of history? The answer is no, there is still a huge market space for 150mm wafers. A large number of 150mm fabs in the industry were closed, and more and more 300mm fabs were launched and gradually achieved mass production.

The function of the analog chip is to connect the real world and the digital world. Most of the information in the world we live in is composed of continuous variables, such as sound waves, light intensity, current, temperature, etc. These variables must be processed by analog chips to become discrete variables that can be calculated by digital chips, that is, 0- 1 variable. .

Stop pins turn off all switches to reduce EMI or ripple and minimize distortion passed to precision signal chains, measurements, sensors or wireless connected components. The mode pin allows continuous conduction mode (also known as forced pulse width modulation mode) to improve ripple or noise performance and reduce the impact on transmission in sensitive RF applications. .

AD1377JD/KD_AD1981HDJSTZ-91-RL

AD1885JSTZ

LM5176PWPR LM5176PWPT DRV8876PWPR TPS23751PWPR TPS61194PWPR.

TPS630701RNMT TPS630702RNMR TPS54218RTER TPS92692PWPR TPS56C230RJER.

BQ24311DSGR TIC10024QDCPRQ1 TL331IDBVR TL331IDBVT TPS63070RNMT.

TPS60403DBVR CSD17313Q2 TPS259571DSGR TPS259571DSGT TLV3202AQDGKRQ1.

AD1377JD/KD_AD1981HDJSTZ-91-RL

There are also different structures where sound waves propagate as transverse waves. In the above-mentioned BAW-SMR and FBAR?filter diagrams, sound waves propagate in the form of longitudinal waves, that is, the direction of particle vibration and the direction of wave propagation are parallel.

Ladder type can be used on single-ended (single-ended/unbalanced) and differential (balanced) signals, while lattice type is more suitable for differential (balanced) signals.

relevant information