BYN3226_NTMSD6N303R2G Introduction

The resistance of this current path is called the internal resistance of the MOS tube, that is, the on-resistance. The size of this internal resistance basically determines how much on-current the MOS tube chip can withstand (of course, it is related to other factors, such as thermal resistance). The smaller the internal resistance, the larger the current (because the heat is small).

In simple terms, the motor is driven by the output current of the MOS tube such as NCE80H12. The larger the output current (in order to prevent overcurrent from burning the MOS tube, the controller has limited current protection), the motor torque is strong and the acceleration is powerful, so MOS Tubes play a very important role in electric vehicle controllers.

BYN3226_NTMSD6N303R2G

SI4966DY-T1-E3

BYS3105 BYP3105 BYJ31020A BYH31012A BYJ31012A BYP3104 BYF31010A BYP31013A BYS31010A BYH31055 .

MOS tube 3306 product features 1. RDS(on)=7mΩ@VGS=10V 2. Lead-free green equipment 3. Low resistance switch to reduce conduction loss 4. High avalanche current.

Barrier capacitance: In power semiconductors, when the N-type and P-type semiconductors are combined, the electrons of the N-type semiconductor will partially diffuse into the holes of the P-type semiconductor due to the concentration difference, so they will form on both sides of the junction surface. Space charge area (the electric field formed by the space charge area will resist the diffusion movement, and finally make the diffusion movement reach equilibrium);

As for why not to use depletion-type MOS tubes, it is not recommended to get to the bottom of it. . For these two enhanced MOS tubes, NMOS is more commonly used.

BYN3226_NTMSD6N303R2G

ZXMN3G32DN8TC

BYM8615 BYH8638 BYN8610A BYM8628 BYN8222 BYM31020 BYS31010 BYJ3104 BYH3105 BYP3109.

BYP31036 BYD31010A BYD31024A BYP31017 BYS31018 BYF3104 BYH3108 BYF3109 BYM31032 BYN31333A .

BYM4610 BYM4640 BYM4875 BYM81080 BYM81095 BYM826 BYM8311 BYM8315 BYH8415 BYM8415.

. The characteristics of a MOSFET can be characterized by a transfer characteristic curve and a drain output characteristic curve. Figure 3 shows the handling characteristics of a certain FET. The transfer characteristic refers to the relationship curve between the gate voltage UGS and the corresponding drain current ID when the voltage UDS between the drain and the source is at a certain fixed value.

BYN3226_NTMSD6N303R2G

The lithium battery is mainly composed of two blocks, the battery cell and the lithium battery protection board PCM.

NCE2302C NCE8205t NCE2004Y NCE2006Y NCE2007NS.

relevant information