Features of TVP5150AM1

Accept NTSC (J, M, 4.43), PAL (B, D, G, H, I, M, N, Nc)

and SECAM (B, D, G, K, K1, L) video

Support ITU-R BT.601 standard sampling

High-speed 9-bit analog-to-digital converter (ADC)

Two composite inputs or one S-Video input

with clamp and

Fully differential CMOS analog preprocessing channel for automatic gain control (AGC) for optimal signal-to-noise (S/N) performance

Ultra low power consumption

48-terminal PBGA package (ZQC) or 32-terminal TQFP package (PBS)

Power-down mode: <1 mW

Control brightness, contrast, saturation, hue and sharpness via I2C

Complementary 4-line (3-H delay) adaptive comb filter for cross luminance reduction

and cross chroma noise

Patented architecture for locking on to weak, noisy or unstable signals

Single 14.31818-MHz crystal for all standards

Internal phase-locked loop (PLL) for line-locked clock and sampling

Subcarrier phase-locked output for synchronizing color subcarrier of external encoder

3.3V Digital I/O Supply Voltage Range

Standard Programmable Video Output Format

ITU-R BT.656, 8-bit 4:2:2 with embedded sync

8-bit 4:2:2 discrete sync

Macrovision® Copy Protection Detection

Advanced Programmable Video Output Format

2x oversampled raw vertical blanking interval (VBI) data during active video

VBI data sliced during horizontal blanking or active video

Supported VBI Modes

Teletext (NABTS, WST)

Closed Caption Decoding Using FIFO and Extended Data Services (XDS)

Widescreen signal, video programming system, CGMS-A, vertical interval time code

Gemstar 1x/2x EPG Compatibility Mode

allow users

Custom configuration modes for programming slice engines for unique VBI data signals

power-on reset

Industrial Temperature Range (TVP5150AM1I): –40°C to 85°C

Compliant with automotive application requirements

(AEC-Q100 Rev G – TVP5150AM1IPSQ1, TVP5150AM1IPBSRQ)

Description of TVP5150AM1

The TVP5150AM1 device is an ultra-low power NTSC/PAL/SECAM video decoder. Available in a space-saving 48-terminal PBGA package or 32-terminal TQFP package, the TVP5150AM1 decoder converts NTSC, PAL and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete synchronization is also available. The optimized architecture of the TVP5150AM1 decoder enables ultra-low power consumption. The decoder consumes 115 mW under typical operating conditions and less than 1 mW in power-down mode, greatly extending battery life in portable applications. The decoder uses only one crystal for all supported standards. The TVP5150AM1 decoder can be programmed using the I 2 C serial interface.

The TVP5150AM1 decoder converts baseband analog video to digital YCbCr 4:2:2 component video. Composite and S-video inputs are supported. The TVP5150AM1 decoder includes a 9-bit analog-to-digital converter (ADC) with 2x sampling. Sampling is ITU-R BT.601 (27.0 MHz, generated by a 14.31818-MHz crystal or oscillator input) and is line locked. The output format can be 8-bit 4:2:2 or 8-bit ITU-R BT.656 embedded sync.

The TVP5150AM1 decoder utilizes Texas Instruments (TI) patented technology to lock onto weak, noisy or unstable signals. Generates genlock/real-time control (RTC) output to synchronize downstream video encoders.

Complementary four-line adaptive comb filtering is available for the luma and chroma datapaths to reduce cross-luminance and cross-chroma artifacts; a chroma trap filter is also available.

Video characteristics including hue, brightness, saturation and sharpness can be programmed using the industry standard I 2 C serial interface. In addition to digital video output, the TVP5150AM1 decoder can generate sync, blanking, lock and clock signals. The TVP5150AM1 decoder includes methods for advanced vertical blanking interval (VBI) data retrieval. The VBI data processor slices, parses, and error checks data for teletext, closed captioning, and many other formats.

The TVP5150AM1 decoder detects copyright-protected input signals according to the Macrovision® standard and detects Type 1, 2, 3 and color bar processes.

The main modules of the TVP5150AM1 decoder include:

Powerful sync detector

ADC with analog processor

Y/C separation using quad-line adaptive comb filter

Chroma processor

Brightness processor

Video Clock/Timing Processor and Power Down Control

output formatter

I 2 C interface

VBI data processor

Macrovision detection for composite video and S-video