-
2022-09-23 17:22:28
TLV62568APDRLR TI/Texas Instruments imported original (spot)
parameter
Vin (Min) (V)2.5
Vin (Max) (V)5.5
Vout (Min) (V)0.6
Vout (Max) (V)5.5
Iout (Max) (A)1
Iq (Typ) (uA)35
Switching frequency (Min) (kHz)1500
Switching frequency (Max) (kHz)1500
FeaturesEnable, Forced PWM, Power Good, Synchronous Rectification
Operating temperature range (C)-40 to 125
RatingCatalog
Regulated outputs (#)1
The TLV62568A, TLV62569A devices are synchronous step-down DC/DC converters optimized for high efficiency and compact solution size. The device integrates switches with output currents up to 2A. Over the entire load range, the device will operate in pulse-width modulation (PWM) mode with a 1.5MHz switching frequency. In shutdown, current consumption is reduced to less than 2µA.
Internal soft-start circuitry limits inrush current during startup. In addition, other features such as output overcurrent protection, thermal shutdown protection and power good output are built in. The device is available in a SOT563 package.
characteristic
Forced PWM mode reduces output voltage ripple
Efficiency up to 95%_Low RDS(ON) Switch: 100mΩ/60mΩ
Input voltage range is 2.5V to 5.5V
Adjustable Output Voltage Range from 0.6V to VIN
100%_Duty Cycle for Ultra Low Dropout
1.5MHz Typical Switching Frequency
Power Good Output
Overcurrent Protection
Internal soft start
Thermal Shutdown Protection
Packaged in SOT563
Pin-to-pin compatible with TLV62568, TLV62569
CREATE CUSTOM DESIGNS WITH WEBENCH® POWER SUPPLY DESIGNER