FDN337N On MOSFET N-CH 30V 2.2A SSOT3

product attribute attribute value

Product Category:

Product Category:MOSFET

manufacturer:

Manufacturer:ON Semiconductor

RoHS:YES

technology:

Technology:Si

Installation style:

Mounting Style: SMD/SMT

main products:

Storage IC: AT24C/AT93C series

Audio amplifier IC: LM386/8002A/B(2W/3W))/PAM8403/LM4871/LM4863//LM4890/LM4809/AF4863/MC4863…..

TDA2822/TDA2030/TDA2003/TA2003 etc.

Three-terminal regulator series:

L7805 series, 78L05 series, 78M05/78M08/78M09/78M12/78M15..LM317 etc.

Operational Amplifier ICs:

LM358/LM393/LM324/LM339/LMV321/LMV358/LM324/JRC4558…

Lithium battery protection and supporting IC:

DW01+ 8205A/4054/4055/4056/5056/TC3582B/DW02/CT2101A/CT2104/2105

Power management IC: AMS1117/ /UC/HY3842/UC/HY3843/UC/HY3844/UC/HY3845/UC2843

KA7500/TL494/MC34063..

Telephone circuit: MC34018/MC34118/MC34119/KA2411…

Time base circuit: NE555/556…

Radio IC: CD9088CB/TDA2822/CSC2003/CD2003….

MOS tube: 9435/4953/9926/SI2301/SI2302…series, AO3400/AO3401/AO3402..series

Display driver IC: 74HC series/CD4000 series

Darlington tube series IC: TIP41C/TIP42C /TIP122/127…..ULN2003/ULN2803…

BTA/BT series SCR: BTA06-BTA41 full series, BTA204-BTA316-6/800B/C full series

Schottky: MBR10100CT /MBR10200CT /MBR20100CT /MBR20200CT, MBR1045/MBR2045 etc.

Remote control car IC: TX2B/RX2B, etc.

Infrared remote control transmitter IC: HT6221/HT6622/6621/6222/HT1621B etc.

According to the Taiwan media "Financial News", former Elpida president Yukio Sakamoto served as the senior vice president of Ziguang Group and the CEO of the Japanese branch. The matchmaker was Gao Qiquan, chairman of Yangtze River Storage.

Recently, Sakamoto Yukio said in an exclusive interview with Japan's "Diamond Weekly" that he and Gao Qiquan were old acquaintances. Three years ago, Gao Qiquan invited him to Ziguang Group to do NAND, but Sakamoto Yukio still has an obsession with DRAM. , therefore declined Gao Qiquan.

Since the beginning of this year, Gao Qiquan has invited Sakamoto Yukio twice to do DRAM together. Originally, he thought that his 70-year-old age would cause his physical strength to be unable to keep up, but because of the pace of learning kendo two years ago, he felt that he should be able to continue to work for two or three years. year. Therefore, when Gao Qiquan went to Japan again in September, it only took 30 minutes to invite Yukio Sakamoto, because DRAM was so attractive to him.

A few days ago, Sakamoto Yukio said in an interview that Ziguang's goal is to mass-produce DRAM memory within 5 years, and his job is to assist the company to achieve its goal. For this reason, Ziguang will set up a "development center" in Kawasaki, Kanagawa, Japan, and it is expected to recruit 70- 100 engineers, in cooperation with the manufacturing process team in China, spend 2-3 years to build a memory technology that can be mass-produced.

Regarding the recruitment of talents, Yukio Sakamoto said that it should come from Japanese semiconductor manufacturers such as Renesas Electronics, or people who serve in Taiwanese companies but are dissatisfied with the status quo. He emphasized that many engineers are excellent and willing to work, but limited by the company's division of labor strategy, they can only do subdivided work and lack freedom.

Yukio Sakamoto further pointed out that to make good DRAM, designers must consider the product as a whole, so companies must let them play freely, and Ziguang not only pays well, but should also provide an interesting working environment for them.

Tsinghua Unigroup's DRAM business group was established in June this year, with Diao Shijing, who was the director of the Electronic Information Department of the Ministry of Industry and Information Technology, as the chairman, and Gao Qiquan as the CEO. On August 27, Tsinghua Unigroup announced that it had signed a cooperation agreement with the Chongqing Municipal Government, and invested in a DRAM R&D center and factory in Chongqing. The factory is scheduled to start construction at the end of 2019 and be completed in 2021.

In addition, a source revealed that Tsinghua Unigroup has planned to invest 800 billion yuan in the next ten years to accelerate the mass production of DRAM.

With the heavy participation of Sakamoto Yukio, the DRAM layout of Tsinghua Unigroup is expected to grow further. It is understood that Yukio Sakamoto has more than 30 years of experience in the DRAM field and has excellent leadership in technology and strategic development. Mr. Yukio Sakamoto served as the vice president of Texas Instruments, the general manager of the semiconductor department of Kobe Steel's electronic information department, the president and representative director of Nippon Semiconductor, and the president, representative director and CEO of Elpida Storage.

AD8505ARJZ AD8532ARZ-REEL7 AD8534ARZ-REEL AD8541ARTZ-REEL7 AD8542ARZ-REEL7 AD8544ARUZ AD8544ARZ AD8613AUJZ AD8617ARZ-REEL7 AD8692ARZ-REEL7 AD8694ARZ-REEL7 ADA4505-1ARJZ AD8505ARJZ AD8532ARZ-REEL7 AD8534ARZ-REEL AD8541ARTZ-REEL7 AD8542ARZ-REEL7 AD8544ARUZ AD8544ARZ AD8613AUJZ AD8617ARZ-REEL7 AD8692ARZ-REEL7 AD8694ARZ-REEL7 ADA4505-1ARJZ

Samsung is once again caught up in rumors of factory closures. It is reported that Samsung will close its last mobile phone factory in China as soon as September. The company is currently doing the final liquidation work. The factory has been communicating with workers about the closure since May this year. The factory will be completely closed. A reporter from Beijing Business Daily reached out to Samsung China, but as of press time, the other party has not responded.

There have been many reports this year about the rumors of Samsung closing its Chinese factories, but none of them have been confirmed by Samsung. In early June, it was reported that Samsung Electronics was cutting production and laying off workers at its only remaining smartphone factory in China, the factory in Huizhou, Guangdong province. If the rumors are true, this factory is not the first factory Samsung has closed in China. As early as December 31, 2018, the 18-year-old Tianjin Samsung mobile phone manufacturing plant (Samsung Tianjin Communication) was shut down. In 2010, Samsung produced and sold more than 200 million mobile phones, of which more than 60% were produced in China, and the Tianjin factory produced the most.

It is reported that in recent years, Samsung is gradually shifting its mobile phone manufacturing to India and Vietnam. Among them, Vietnam has undertaken the most smartphone manufacturing business. As of April last year, Samsung’s total investment in Vietnam was as high as 17.3 billion US dollars, and 8 manufacturing facilities were built locally. The factory mainly produces smartphones, electronic parts, etc.

However, while the factory is closed, Samsung appears to be building a new factory. It is reported that Samsung is accelerating the construction of new projects such as automotive MLCC factories (multi-layer ceramic capacitors) and power battery production lines, and the new investment in high-end manufacturing has reached 2.4 billion US dollars (about 16.26 billion yuan). At present, there are 10 Samsung-related companies in the Tianjin area, with a cumulative investment of more than 5.8 billion US dollars (about 39.3 billion yuan), accounting for nearly 1/5 of Samsung's total investment in China.

Hong Kong Xinrui Electronics Co., Ltd., 18 years of professional component distributors (authorized and non-authorized brands), one-stop terminal manufacturer support: (quality assurance and integrity management) is the company's commitment to provide customers with brand original semiconductors, electronic components Terminal supporting market, focusing on ESD/TVS electrostatic protection diodes, LDO low-power voltage regulators, MOS tubes, battery charging and management power supplies, LEDs, optocouplers, resistors and capacitors, PCB solutions (wireless Bluetooth solutions, Bluetooth sports version solution one-stop, speakers, wireless power bank).

Main products: ESD electrostatic diodes, TVS diodes, battery charging and management power supplies, MOS tubes, LDO low-power voltage regulators.

Company: Hong Kong Xinrui Electronics Co., Ltd.

Contact: Miss Yao

Mobile: 13725590222

Tel: 0755-83780666/83265111

Fax: 0755-82800889

QQ: 3373563833

Address: 26B, Block B, Huaqiang Plaza, Futian North Road, Futian District, Shenzhen

Company website: www.xrdz-hk.com

Hong Kong Xinrui Electronics Co., Ltd. part of the spot:

TLV70433DBVR、TP4101、TP5100、TP4056、RT9013-33PB、TPS73618DBVR、MIC5255-3.0YM5、CDSOT23-T36C、CDSOT23-24C、TL431CDBZR、TL431IDBZR、TLV1117CDCYR、LM317EMPX、NCP1117ST33T3G、NCP1117ST50T3G、PESD5V0V1BL、PESD5V0V1BSF、PESD2CAN、PESD5V0S1BA、PESD12VS2UT、PESD15VL2BT , PESD36VS2UT, PESD3V3L1BA, PESD24VL2BT, IP4220CZ6, IP4223CZ6, BCP56-16, BCP51-16, BSN20, uClamp0511T.TCT, SRV05-4.TCT, RCLAMP0531T.TCT, RCLAMP0502A.TCT, SD05C.TCT, SRAMP05.TCT 、ESD5Z2.5T1G、ESD5Z3.3T1G、CM1213A-01SO、CM1213A-04SO、NTR4501NT1G、NTR4502PT1G、NTR4170NT1G、NTR4171PT1G、RLST23A032C、RLST23A0122C、RLST23A052C、PRTR5V0U2X、GBLC03CI-LF-T7、GBLC03C-LF-T7、GBLC05CI-LF-T7 , GBLC05C-LF-T7, GBLC08CI-LF-T7, GBLC08C-LF-T7, GBLC12CI-LF-T7, GBLC12C-LF-T7, GBLC15CI-LF-T7, GBLC24CI-LF-T7, GBLC24C-LF-T7, PSD03C -LF-T7, PSD05-LF-T7, PSD05C-LF-T7, PSD08C-LF-T7, PSM712-LF-T7, AO3400, AO3400A, AO3401A, AO3402, TPSMB6.8CA-E3/52, TPSMB6.8A, TPSMB47A , TPSMB43A, TPSMB39A, TPSMB36A, TPSMB33A, TPSMB30A, STTH208, , IRLML2502TRPBF, TP4101, IRLML6401TRPBF, TLV70433DBVR, PESD5V0S1BB, PSM712-LF-T7, NTR4171PT1G, SGM2 036-3.3YUDH4G/TR, SGM2036-1.8YUDH4G/TR, DMN2046U-7, etc.

For more models, please inquire:

Hong Kong Xinrui Electronics Co., Ltd. is a professional supplier of integrated circuits and has many years of sales experience in the bank! With a large stock of stock, integrity-based, customer first, the quality of products for customers!

Due to the large number of company models, it is impossible to upload them one by one. If you can't find the product you want on the website, please contact the salesperson. Our company can provide electronic components distribution service.

Company: Hong Kong Xinrui Electronics Co., Ltd.

Contact: Miss Yao

Mobile: 13725590222

Tel: 0755-83780666/83265111

Fax: 0755-82800889

QQ: 3373563833

Address: 26B, Block B, Huaqiang Plaza, Futian North Road, Futian District, Shenzhen

Company website: www.xrdz-hk.com

AOZ8808DI-05、AOZ1284PI、AOZ1280CI、AOT11N70、AON7934、AON7544、AON7534、AON7524、AON7520、AON7506、AON7423、AON7421、AON7418、AON7410、AON7409、AON7407、AON7405、AON7403、AON7401、AON7296、AON7264E、AON6522、AON6512、AON6508、 AON6504、AON6414AL、AON6262E、AON5820、AON2801、AOD603A、AOD516、AOD484、AOD482、AOD478、AOD444、AOD4185、AOD4184L、AOD4184A、AOD4132、AOD413A、AOD409、AOD417、AOD407、AOD403、AO8822、AO8810、AO3414、AO3402、AO4606、 AO4485、AO4453、AO4447AL、AO4443、AO4468、AO4435、AO4421、AO4419、AO4407AL、AO4406AL、AO4354、AO4292、AO4264E、AO3485、AO3481、AO3480、AO3423、AO3422、AO3416、AO3415AL、AO3415、AO3407A、AO3401A、AO3400A

Hong Kong Xinrui Electronics Co., Ltd. is a professional supplier of integrated circuits and has many years of sales experience in the bank! With a large stock of stock, integrity-based, customer first, the quality of products for customers!

Due to the large number of company models, it is impossible to upload them one by one. If you can't find the product you want on the website, please contact the salesperson. Our company can provide electronic components distribution service.

Company: Hong Kong Xinrui Electronics Co., Ltd.

Contact: Miss Yao

Mobile: 13725590222

Tel: 0755-83780666/83265111

Fax: 0755-82800889

QQ: 3373563833

Address: 26B, Block B, Huaqiang Plaza, Futian North Road, Futian District, Shenzhen

Company website: www.xrdz-hk.com

According to the latest research report of Tianfeng International analyst Ming-Chi Kuo, it is expected that the iPhone will support 5G in 2020, and the design of the metal middle frame will be significantly changed, including more complex segmented design, new procedures for grooving and injection molding, and assembly with sapphire or glass case covers To protect the grooved injection molding structure.

At the same time, the design of the iPhone in 2020 has changed significantly and is similar to the iPhone 4. It is expected that the shipment of the new iPhone in 2020 can increase to 80-85 million units. In the previous report, it was expected that one of the selling points of the new iPhone would be the new exterior design. It is expected that the structure of the new iPhone will still use the design of the metal middle frame and the front and rear 2/2.5D glass, but the surface of the metal middle frame will be changed to a flat design similar to the iPhone 4. Replaces the current surface design.

Ming-Chi Kuo believes that the new iPhone has the following selling points, including a new design, 5G support, and ToF to improve the AR and photo experience.

In previous reports predicting that all three new iPhones will support 5G, the metal middle frame of the new iPhone is expected to have the following significant changes in design or production. First of all, the segmented design, production and assembly of the metal middle frame will be more complicated. Secondly, the supplier will dig grooves on the metal middle frame and inject it, which is beneficial to reduce the negative impact of metal shielding on high-frequency transmission efficiency when configuring the internal antenna. Finally, sapphire or tempered glass is placed over the cutout to protect the injection molded structure.

It is predicted that the unit price of the metal middle frame and case of the new iPhone will increase significantly, and the metal middle frame and case of the iPhone 11 Pro Max, iPhone 11 Pro and iPhone 11 are estimated to be 55–60/70–75, 45–50/ 60–65 respectively. with 30–35/ 40–45 (USD). If sapphire is used for the grooved cover of the new iPhone, it is estimated that the unit price of the metal middle frame and case will increase by about 50–60%/ 40–50%. If tempered glass is used for the grooved cover of the new iPhone, the unit price of the metal middle frame and case will increase by about 25–35%/ 20–30%.