The SPL06-001 is a miniaturized Digital Barometric Air Pressure Sensor with a high accuracy and_a low

current consumption. The SPL06-001 is both a pressure and_a temperature sensor. The pressure sensor

element is based on a capacitive sensing principle which guarantees a high precision during temperature

changes. The small package makes the SPL06 001 ideal for mobile applications and_wearable devices.

The SPL06-001s intemnal signal processor converts the output from the pressure and_temperature sensor

elements to 24-bit results. Each pressure sensor has been calibrated individually and_contains calbration

cofficents. The cofficients are used in the application to convert the measurement results to true

pressure and_temperature values.

The SPL06-001 has a FIFO that can store the latest 32 measurements. By using the FIFO, the host

processor can remain in a sleep mode for a longer period of time between readouts. This can reduce the

owerall system power ∞nsumption. Sensor measurements and_alibration efficients are awaitable

through the sertal l2C interface.

Key features

●Pressure range: 300..1100hPa (+9000m .. -500m relating to sea level)

●Temperature Range: 40..+85*C

●Supply voltage: 1.7 .. 3.6V (VDD), 1.2 .. 3.6V (VDDIO)

●Package: LGA package with metal lid

Small footprint: 2.5mm x 2.0mm;_Super-flat: 0.95mm height

●Relative accuracy. t0.06hPa, equiv. to +0.5 m

●Absolute accuracy: typ. t1hPa (300 ..1100hPa)

●Temperature accuracy: t 0.5°C.

●Pressure temperature senity: < 0.5Pa/K

●Measurement time: Typical: 28 ms. Minimum 3 ms.

●Average current consumption: High precision: 60 μA. Low power. 3 uA, Standby: <1 uA.

●12C and_SPI interface, Embedded 24-bit ADO.

FIFO: Stores latest 32 pressure or temperature measurements.

●Pb-free, halogen-ree and_RoHS compliant

●MSL1

Typical applications

●Enhancement of GPS navigation (dead-reckoning, slope detecion, etc.)

●In- and_out-door navigation

●Lelsure and_sports

●Weather forecast

●Vertical velocity indication (ise/sink speed)

Speclflc notes

Particles can infuence the performance of the pressure sensor, we strongly recommend you to introduce

special measures to avoid deposition of particles on the MEMS membrane or screen particles after

assembly as the assembly process is considered to be the main root cause for particle generation.

Supply brand new original SPL06-001