L x W dimension: products of 0.6 x 0.3 mm or lesscompactDeratingVoltage and_temperature derating recommended productHiQBy devising ceramic materials and_electrode materials,low dissipation is achieved in frequency bands of VHF,UHF and_microwave or beyond.LowESLLow dissipation for high frequencyOperating Voltage/Rated Voltage (%) Low inductanceThis capacitor is designed so that the parasitic inductance component (ESL)that the capacitor has on the high frequencyside becomes lower.This product is suitable when a voltage continuously applied to a capacitor in an operating circuit, is used below (derated)the rated voltage of the capacitor. This model guarantees the test conditions in the endurance test, at a rated voltage x 100%_at the maximum operating temperature. A reliability assurance level equivalent to a common product can be secured, by using this product within the voltage and temperature derated conditions recommended in the figure below. Recommended Conditions of the Derating Operating Vo ltage and_Temperature120100Anti-Product suitable for acoustic noise reduction and_low distortionnoiseThis product suppresses acoustic noise,80which occurs when a ceramic capacitor is used, by devising the materials and_configuration.DeflectingProduct resistant to deflection crackingcrackThis capacitor is designed to prevent failures as much6040125°C Type105°C Type85 °C Type20as possible by short mode caused by crackingwhen there is board deflection.SolderingProduct with solder cracking suppressioncrackThis capacitor is configured with metal terminals00255075100125150Product Temperature (°C)and_leads connected to the chip.The metal terminals and_leads relieve the stress from expansionand_contraction of the solder, to suppress solder cracking