Miniaturization of portable equipment and_personal

mobile devices has created increased demand_for a low

profile, high density, and_high reliability connectors.

*The design of this connector has been made thinner and_smaller, with a height of 0.9mm and_width of 3mm.

*PCB footprint: Reduced approximately 48%_(as compared

with Hirose Electrics 0.5mm pitch FH12 Series

connectors)

*Connector weight: Reduced approximately 78%_(as compared

with Hirose Electrics 0.5mm pitch FH12 Series connectors)

2. Conductive traces on the PCB can run under

the connector

All bottom surface of the connector is solid, without any

exposure of the contact.

3. Proven Flip-Lock Actuator System assures

easy and_reliable operation

Rotating actuator permits easy insertion and_reliable

connection with the FPC & FFC.

Tactile sensation confirms complete mechanical locking of

the actuator and_the electrical connection.

4. Accepts 0.2mm & 0.3mm thick FPC/FFC

No exposed contacts on the bottom of the connector.

The connector will also terminate with 0.2mm thick Flat

Flexible Cable (FFC).

5. Board placement with automatic equipment

Flat upper surface and_tape and_reel packaging facilitate

vacuum pick-up and_placement. Standard reel packaging

contains 5000 connectors.

6. Wide range of contact counts

The contact positions available range from 4 to 50.

7. Satisfies Halogen-free requirements

All materials and_substances used in this product comply

with the Halogen-free standards.

*_Defined according to IEC61249-2-21

Br: 900ppm max, Cl: 900ppm max, Br+Cl: 1,500ppm max