Acting as TI Texas Instruments distributor

LT?'s 1996 combined a precision op amp precision amplifier LT1996AIMS#PBF

One Chip Solution with Eight Precision Resistors

Used to accurately amplify the voltage. Increase from -117 to 118, gain accuracy is 0.05% for any external components. This device is very good

Suitable for use as a differential amplifier, among which the precision amplifier LT1996AIMS#PBF with excellent performance

Resistor matching results in a common mode rejection ratio greater than 80dB. 50µv Maximum Input Compensation Amplifier Characteristics

The product of voltage and gain bandwidth is 560kHz. The precision amplifier LT1996AIMS#PBF

The device's operating voltage varies from 2.7V to 36V and will supply only 100µA at a 5V supply current. of

Output fluctuates to within 40mV of either supply rail.

Internal resistance has excellent matching characteristic slip stability; 0.05% with temperature change_

The LT1996 is probably the last op amp you have to stock up on.

as it provides several precision matches

resistors, you can easily configure several different

Classic gain circuit does not add external control

overall. These few pages of simple circuit data

The worksheet demonstrates how to use the LT1996 simply. it

can be configured as a differential amplifier, as well as

Inverting and non-inverting single-ended amplifiers. of

In fact, resistors and op amps are provided together in

Such a small package tends to save your board space and

Reduce complexity and facilitate detection.

the operational amplifier

The op amp inside the LT1996 is a precision device

with 15µv typical offset voltage and 3 na-input bias

rent. The input bias current is extremely low, so matching the source resistance seen by the op amp input will provide the best output accuracy. Op amp input

Not rail-to-rail, but extends to within 1.2V of VCC and 1V

v-shaped. For many configurations, the chip input

The function rail-to-rail is effectively attenuated to the + input. The output is true rail-to-rail and goes to the internal

40mV supply rail. The gain bandwidth product op amp is about 560 kHz. When the noise gain is greater than or equal to 2,

It is stable with capacitive loads up to 500pF. Gains in Noise

Below 2, it is stable with capacitive loads up to 100pF. The resistance

The internal resistance of the LT1996 is well matched to the Sicilian element, protected by a metal barrier.

Although absolute tolerance was poor (±30%),

They match within 0.05%. This enables the chip to

The CMRR is 80dB and the gain error is within 0.05%.

The resistance values are (450k/9), (450k/27), (450k/81)

450k, connected to each input. The Resistive Precision Amplifier LT1996AIMS#PBF

450k and (450k/81) power limited to 1 watt

Resistors, 0.3 watts for (450k/27) resistors and 0.5 watts

(450k/9) resistor; however, in practice, the power

values of will limit dissipation well below these values

The teed matching temperature coefficient is less than 3ppm/℃. The resistors are also very stable over voltage, exhibiting less than 10ppm non-linearity.

The LT1996 is fully specified on 5V and ±15V supplies and

From -40°C to 85°C. The device can be used in space

Save 10 lead on MSOP and DFN packaging. Gain selectable from -13 to 14 for one amplifier

The above article is provided by Anfu Century Electronics. Anfu Century Electronics is a platform for you to consult the selection of components. We will provide you with efficient, convenient and ideal services and provide you with affordable prices. The team will provide you with efficient service. Your trust is the driving force for us to keep moving forward. If you need purchasing or BOM quotation, please feel free to consult us.

In line with the business tenet of "integrity first, quality first, reasonable price", we will continue to provide customers with better services, and we will establish long-term and friendly cooperative relations with customers.

Products are widely used in industrial automation, medical equipment, motor control, optical modules, power systems, instrumentation, smart home, power grid automation, communications, automotive electronics, etc.

The company integrates 3 million pieces of stock in stock, all stocks can be quoted online for fast delivery, the fastest overseas delivery is 3-5 working days, and the domestic delivery is the same day! Solve the one-click BOM allocation order for small and medium-sized enterprises and match transactions.

Shenzhen Anfu Century Electronics Co., Ltd. is an internationally renowned distributor of electronic components. After years of hard work, the company has become one of the largest authorized distributors of electronic products in China, with more than 1,000 domestic and international customers of various types. The company has established branches in Taiwan, Hong Kong, Beijing and Shenzhen, There is a transit warehouse.

Anfu Century constantly seeks the best talents in the industry, continuously optimizes the front-end marketing and logistics support team with a perfect high-quality service system, acts as a professional partner of the industrial supply chain, and provides Demand_Creation, Turnkey Solution, Technical support, warehousing logistics and IC e-commerce and other value-added services to meet the needs of different customers such as original equipment manufacturers (OEM), original design manufacturers (ODM), electronic manufacturing service providers (EMS) and small and medium-sized enterprises!