SVGA0510SG Guaranteed imported original, in stock, short delivery time, price advantage, assured quality, first choice - Yujixin Electronics, as the world's first RAD hard point load converter, VPT's SVGA series in LEO, MEO, GEO and deep Mission-proven in the launch system of the empty mission. Compliant with MIL-PRF-38534 Class K DLA mounters, these off-the-shelf devices can help you quickly get your system to the ground. Check out VPT's space program legacy.

The SVGA series is a very efficient point-of-load DC-DC converter for voltage reduction at the point of use. According to MIL-PRF-38534, Appendix G, it is ready for characterization of 100 krad (Si) total dose radiation according to the VPT's certified radiation program.

Operating at a nominal frequency of 250 kHz, these regulated non-isolated converters are optimized for low voltage load applications with high efficiency synchronous rectification and fast transient response points. SVGA load converters are designed and manufactured in an ISO9001 certified facility and certified to MIL-PRF-38534 Class H and K and MIL-STD-883.

Combine our extensive family of DC-DC space converters with these point-of-load space converters to create a lightweight, highly efficient, space-friendly power system.

feature:

Operates from 5V input

Adjustable output voltage from 0.8V to 3.4V

Output up to 10 amps

High efficiency, up to 94%_High power density, up to 100W/in>3

output suppression control

Low output noise

Without opto-isolator

Short circuit protection

Spatial Hierarchy Features:

Guaranteed TID performance to 100 carats (Si) including ELDRS.

See 85 MeV/mg/cm2. Transients are characterized by cross-section and amplitude.

Provides worst-case analysis, stress, radiation and reliability reports.

For MIL-PRF-38534 Class H and K, DLA SMD#5962-17202

MIL-PRF-38534 Component Evaluation Kit

Manufactured in MIL-PRF-38534 Class H and Class K facilities

MIL-STD-883 standard

ISO-9001 standard SVGA0510SG unit parameters conditions

Small typical value Large value

Input voltage Vout=0.8V to 2.5V

Output voltage = 2.6V to 3.3V 3.5

4.17.0

7.0 VDC

Output voltage at full load, adjustable Vout-1.0

-1.5+1.0

+1.5%Vout

Output power 0 34 W

Efficiency Vout=3.3V 88 93%_full load output ripple

20Hz to 10MHz 60 100 mVpp

Shenzhen Yujixin Electronics Co., Ltd.

Contact: Mr. Xiao

Mobile: +86-134-3077-2257? (Same number on WeChat)

Tel: +86-0755-2870-8773

QQ:1157099927 ?2039672975

E-mail: xiaozheng1608@163.com

Address of Shenzhen Office: Room B17, West 5th Floor, Building 4, SEG Science and Technology Park, Huaqiang North, Futian District, Shenzhen