Generally explained These H bridge drives are full bridge drivers used for brush motor applications. Each integrated circuit can work at a wide range of power supply voltage (from 6V to 32V), and the output current can reach 2A. The output -level MOS transistor allows PWM speed control. The integrated VREF voltage control function allows directly replace the interrupt motor I...
Read more
General description lm2678 The series stabilizer is a single -piece integrated circuit that provides all active functions for a downwriting switch stabilizer. The voltage of 5A has a load with excellent lines and load adjustment characteristics. By using the resistance DMOS power switch. This series includes a fixed output voltage of 3.3V, 5V, and 12V, which can be announced. Th...
Read more
Features ESD protection of high-speed data cable: -Excess: IEC 61000-4-2 (ESD) ± 24kV (air), ± 24kV (contact point contacts ) -IEC 61000-4-5 (Lightning) 4A (8/20 microsecond) -Human model (HBM) ± 24kV Small Packaging saves board space Low insertion loss Protect four I/O lines low clamp voltage Low operating voltage: 5.0V Application...
Read more
Features Narrow SOIC 8 DROD package; low -power run 5V operation; the maximum 1.1 mAh per channel@0 Mbps to 2 Mbps; the maximum of each channel is 3.7 mAh@10 Mbps; the maximum per channel is 8.2 per channel 8.2 maximum 8.2 per channel. Mia@25 Mbps; 3V operation; the maximum 0.8 mAh per channel@0 Mbps to 2 Mbps; the maximum 2.2 mAh@10 Mbps per channel; the maximum of 4.8 ...
Read more
Feature description 23 LM2574 series stabilizer is single -chip 3.3V, 5V, 12V, 15V, the output can be adjusted to the voltage switch staber Integrated circuits that provide all active functions can be adjusted for the output voltage range, drive the 0.5A load, with excellent lines and loads 1.23V to 37V (high voltage type 57V) ± 4%. These devices have a fixed output line and l...
Read more
Features * Three -axis induction * Small and low -key packaging * 4mm × 4mm × 1.45 mm LFCSP * Low power consumption: Typical 350μA * Single power operation: 1.8 V to 3.6 V v * 10000 grams of electric shock survival * Excellent temperature stability * Each axis per shaft Bandwidth adjustment with a capacitor * meets the ROHS/Weee lead standard Applicati...
Read more
Features 1. Low input bias current: Typical 50 Pa Low input noise current: 0.01 PA/√Hz Typical Value Low total harmonic distortion Low power supply current: 8 mAh (typical value) gain bandwidth: typical 3 mHz High turnover rate: typical 13 v/ms [ 123] 2. Application Electric Integrated System: UPS Drive and control solution: AC inventor and VF drive ...
Read more
Features *Quick charging and connection of two nickel -cadmium or nickel -hydride cadmium or nickel -metal hydraulic battery pack *Host -delayed pulse switch mode current regulator or external adjustment The door control control of the device *Easy to integrate, for example, rated as a system EMS or used as an independent charger *The pre -charging mass under each charging and voltag...
Read more
Features * Three -axis induction * Small and low -key packaging * 4mm × 4mm × 1.45 mm LFCSP * Low power consumption: Typical 350μA * Single power operation: 1.8 V to 3.6 V v * 10000 grams of electric shock survival * Excellent temperature stability * Each axis per shaft Bandwidth adjustment with a capacitor * meets the ROHS/Weee lead standard Applicati...
Read more
Main features -32 stitch CMOS-IC line/voice circuit, DTMF dial, FSK transmitter and ringtone -In enhanced voice switch - Background noise monitoring -Dual-dual-frequency audio generator -fsk transmitter v.23, Bell 202, V.21, Bell 103 -TX and RX gain programming -D digital volume control of receiving signals -Cylotic feature programming -D double soft i...
Read more
Functional application Provides continuous output of up to 3A DC and stepping motor driver run under the power supply voltage up to 55V Location and speed Services Low RDS (open) is usually 0.33Ω per switch, 3A Factory automation robot TTL and CMOS compatible input ] CNC Machinery No penetrating " current computer printer and drawer 145 ° C outpu...
Read more